Too bad it only has 80mm fans, though if it's polycarbonate as listed, not acrylic as ben listed it, then it should be fairly trouble-free to cut out larger fan holes without risk of causing cracks if you are ambitious enough to do so, though it looks like the rear and possibly the front dimensions won't allow for larger than 92mm but that is enough for an average non-gaming system without excessive fan RPM/noise.

Not enough cooling vents and after months of usage. it will turn yellowish and dusty on the outside..

For these type of case, the PS should be sit on the bottom and raise the MB to the top with 80mm or 92mm cooling fan on the top.

This design Sux